My Store
Fluke 1587 FC 2-in-1 Insulation Multimeter
Fluke 1587 FC 2-in-1 Insulation Multimeter
Couldn't load pickup availability
SPECIFICATIONS
Brand Name: FLUKE
Origin: Mainland China
DIY Supplies: ELECTRICAL
AC Voltage: 1000V
Display Type: Digital display
DC Voltage: 1000V
Measuring Resistance Range: 600.0 Ω/6.000 kΩ/60.00 kΩ/600.0 kΩ/6.000 MΩ/50.0 MΩ ²
Certification: CE
Certification: UL
Measuring Capacitance Range: 9999 μF
Operating Mode: Auto
Model Number: Fluke 1587FC
Is Smart Device: YES
Dimensions: 5.0 x 10.0 x 20.3 cm
Operating Temperature: -20 °C to55 °C
Fluke 1587 FC 2-in-1 Insulation Multimeter, True-RMS, Selectable Insulation Test Voltages Up To 1000 V, Pi/DAR Timed Ratio Tests, Measures Frequency, Includes Low-Pass Filter For Motor Drive VFD
About this item
PI (polarity index) /DAR (dielectric absorption ratio) with Trend It graphs identifies problems faster
Memory storage through mobile Fluke Connect Measurements App eliminates writing down results, reduces errors and saves data for historical tracking over time
Temperature Compensation through App helps establish accurate baselines and relevant historical comparisons
VFD low pass filter for accurate motor drive measurements; Includes auto discharge of capacitive voltage for added user protection
Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V
Fluke 1587 FC Insulation Multimeter
Keep yourself safe. Find hidden problems faster. Put the paperwork down.
The High-Performance 2-in-1 Insulation DMM The Fluke 1587 FC combined with Fluke Connect is a digital insulation tester with a full-featured, true-rms digital multimeter in a single compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance. The Fluke 1587 FC Insulation Multimeter adds four powerful new diagnostic functions through the Fluke Connect measurements app:
Safety first. Keep yourself out of harm’s way by monitoring your test measurements remotely
Prove your job is done right by quickly seeing and sharing measurement results wirelessly with your smartphone
Quickly find problems by saving and comparing measurements over time on a wireless device
Use Fluke Connect Assets (sold separately) and make testing a whole lot easier
Megohmmeter insulation testers
Whether you work on motors, generators, cables, or switch gear, the Fluke digital insulation resistance testers provide noise-free, reliable results. With advanced performance, the insulation tester line is designed to be safe, simple to use and gimmick-free. A perfect solution for insulation testing troubleshooting, commissioning, and preventative maintenance applications.
Fluke 1587 FC Insulation Multimeter
Fluke 1587 FC Insulation Multimeter Whether you work on motors, generators, cables or switch gear, the Fluke 1587 FC insulation multimeter delivers impressive capability in a single unit. No longer do you need to go back to the truck, shop, or tool crib to get the extra tool you need to get the job done. The Fluke 1587 FC is rugged, reliable and easy to use--just what you would expect from Fluke.
Fluke Connect Enabled
Fluke Connect Enabled The Fluke Connect enabled 1587 FC also gives you the flexibility to test wirelessly how and when you want. Fluke Connect test tools communicate with the Fluke Connect free mobile app on your Android or iOS smart device, allowing you to share live measurements, monitor readings from safe distances, and get your job done easier than ever before. The wireless digital multimeter functions as the mobile hub, displaying readings from up to three-meter modules tools simultaneously from up to 20 meters away.
What's in the box:
1.Remote probe
2. Test leads
3. Alligator clips
4. K-type thermocouple
5. Hard case
6. User documentation
Specifications: Fluke 1587 FC Insulation Multimeter
Electrical Specifications | ||
AC voltage measurement | ||
Range | ||
600.0 mV |
Resolution |
0.1 mV |
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) |
±(1% + 3) |
|
Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) |
±(2% + 3) |
|
6.000 V |
Resolution |
0.001 V |
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) |
±(1% + 3) |
|
Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) |
±(2% + 3) |
|
60.00 V |
Resolution |
0.01 V |
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) |
±(1% + 3) |
|
Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) |
±(2% + 3) |
|
600.0 V |
Resolution |
0.1 V |
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) |
±(1% + 3) |
|
Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) |
±(2% + 3)¹ |
|
1000 V |
Resolution |
1 V |
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) |
±(2% + 3) |
|
Accuracy 60 Hz to 5000 Hz ±(% of Rdg + Counts) |
±(2% + 3)¹ |
|
¹ 1 kHz bandwidth | ||
Low-Pass Filter Voltage | ||
Range | ||
600.0 mV |
Resolution |
0.1 mV |
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) |
±(1% + 3) |
|
Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) |
+(2% + 3), -(6% - 3) |
|
6.000 V |
Resolution |
0.001 V |
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) |
±(1% + 3) |
|
Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) |
+(2% + 3), -(6% - 3) |
|
60.00 V |
Resolution |
0.01 V |
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) |
±(1% + 3) |
|
Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) |
+(2% + 3), -(6% - 3) |
|
600.0 V |
Resolution |
0.1 V |
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) |
±(1% + 3) |
|
Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) |
+(2% + 3), -(6% - 3) |
|
1000 V |
Resolution |
1 V |
Accuracy 50 Hz to 60 Hz ±(% of Rdg + Counts) |
±(2% + 3) |
|
Accuracy 60 Hz to 400 Hz ±(% of Rdg + Counts) |
+(2% + 3), -(6% - 3) |
|
DC Voltage Measurement | ||
Range |
Resolution |
Accuracy ±(% of Rdg + Counts) |
6.000 V dc |
0.001 V |
±(0.09% + 2) |
60.00 V dc |
0.01 V |
±(0.09% + 2) |
600.0 V dc |
0.1 V |
±(0.09% + 2) |
1000 V dc |
1 V |
±(0.09% + 2) |
Input impedance |
10 MΩ (nominal), <100 pF |
|
Normal mode rejection ratio |
>60 dB @ 50 Hz or 60 Hz |
|
Common mode rejection ratio |
>120 dB @ dc, 50 Hz or 60 Hz (1 k unbalance) |
|
Accuracies apply to ± 100% of range | ||
DC Millivolts Measurement | ||
Range |
Resolution |
Accuracy ±(% of Rdg + Counts) |
600.0 mVdc |
0.1 mV |
±(0.1% + 1) |
DC and AC Current Measurement | ||
AC 45 Hz to 1000 Hz | ||
Range |
400 mA |
|
Resolution |
0.1 mA |
|
Accuracy ±(% of Rdg+Counts) |
±(1.5% + 2)¹ |
|
Burden voltage (Typical) |
2 mV/mA |
|
Range |
60 mA |
|
Resolution |
0.01 mA |
|
Accuracy ±(% of Rdg+Counts) |
±(1.5% + 2)¹ |
|
Burden voltage (Typical) |
2 mV/mA |
|
DC | ||
Range |
400 mA |
|
Resolution |
0.1 mA |
|
Accuracy ±(% of Rdg+Counts) |
±(0.2% + 2) |
|
Burden voltage (Typical) |
2 mV/mA |
|
Range |
60 mA |
|
Resolution |
0.01 mA |
|
Accuracy ±(% of Rdg+Counts) |
±(0.2% + 2) |
|
Burden voltage (Typical) |
2 mV/mA |
|
Overload |
600 mA for 2 minutes maximum |
|
Fuse protection for mA input |
0.44 mA, 1000 V, IR 10 kA |
|
AC conversion |
Inputs are ac-coupled and calibrated to the rms value of sine wave input |
|
Conversions are true-rms responding and specified from 5% to 100% of range. Input signal crest factor can be up to 3 up to 300 mA, decreasing linearly to crest factor ≤1.5 at 600 mA. For non-sinusoidal waveforms add +(2% reading + 2% FS) typical, for a crest factor up to 3. | ||
¹ 1 kHz bandwidth | ||
Ohms Measurement | ||
Range |
Resolution |
Accuracy +(% of Rdg+Counts)¹ |
600.0 Ω |
0.1 Ω |
±(0.9% + 2) |
6.000 kΩ |
0.001 kΩ |
±(0.9% + 2) |
60.00 kΩ |
0.01 kΩ |
±(0.9% + 2) |
600.0 kΩ |
0.1 KΩ |
±(0.9% + 2) |
6.000 MΩ |
0.001 MΩ |
±(0.9% + 2) |
50.0 MΩ ² |
0.01 MΩ |
±(1.5% + 3) |
Overload protection |
1000 V rms or dc |
|
Open circuit test voltage |
<8.0 V dc |
|
Short circuit current |
<1.1 mA |
|
¹ Accuracies apply from 0% to 100% of range | ||
Diode Test | ||
Diode test indication |
Display voltage drop: 0.6 V at1.0 mA nominal test current: |
|
Accuracy |
±(2% + 3) |
|
Continuity Test | ||
Continuity indication |
Continuous audible tone for testresistance below 25 Ω and off above 100 Ω. Maximum Reading; 1000 Ω |
|
Open circuit voltage |
<8.0 V |
|
Short circuit current |
1.0 mA typical |
|
Overload protection |
1000 V rms |
|
Response time |
>1 m sec |
|
Frequency Measurement | ||
Range |
Resolution |
Accuracy ±(% of Rdg+Counts) |
99.99 Hz |
0.01 Hz |
±(0.1% + 1) |
999.9 Hz |
0.1 Hz |
±(0.1% + 1) |
9.999 kHz |
0.001 kHz |
±(0.1% + 1) |
99.99 kHz |
0.01 kHz |
±(0.1% + 1) |
Frequency Counter Sensitivity | ||
600.0 mV ac |
V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz |
100.0 mV |
V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz |
150.0 mV |
|
DC Trigger Levels¹ to 20 kHz² |
NA |
|
6.0 V |
V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz |
1.0 V |
V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz |
1.5 V |
|
DC Trigger Levels¹ to 20 kHz² |
-400.0 mV and 2.5 V |
|
60.0 V |
V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz |
10.0 V |
V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz |
36.0 V |
|
DC Trigger Levels¹ to 20 kHz² |
1.2 V and 4.0 V |
|
600.0 V |
V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz |
100.0 V |
V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz |
- |
|
DC Trigger Levels¹ to 20 kHz² |
12.0 V and 40.0 V |
|
1000.0 V |
V ac Sensitivity (RMS Sine Wave)¹ 5 Hz to 20 kHz |
300.0 V |
V ac Sensitivity (RMS Sine Wave)¹ 20 kHz to 100 kHz |
- |
|
DC Trigger Levels¹ to 20 kHz² |
12.0 V and 40.0 V |
|
¹ Maximum input for specified accuracy = 10x range (1000 V max). Noise at low frequencies and amplitudes may affect accuracy | ||
Capacitance | ||
Range |
Resolution |
Accuracy ±(% of Rdg+Counts) |
1000 nF |
1 nF |
±(1.2% + 2) |
10.00 μF |
0.01 μF |
±(1.2% + 2) |
100.0 μF |
0.1 μF |
±(1.2% ±90 counts) |
9999 μF |
1 μF |
±(1.2% ±90 counts) |
Temperature Measurement | ||
Range |
Resolution |
Accuracy ±(% of Rdg+Counts)¹ |
-40 ° C to 537 ° C |
0.1 °C |
±(1% + 10 counts) |
-40 ° F to 998 ° F |
0.1 °F |
±(1% + 18 counts) |
¹ Accuracies apply following 90 minutes settling time after a change in the ambient temperature of the instrument | ||
Insulation Specifications | ||
Measurement range |
0.01 MΩ to 2 GΩ |
|
Test voltages |
50, 100, 250, 500, 1000 V |
|
Test voltage accuracy |
+20%, -0% |
|
Short-circuit test current |
1 mA nominal |
|
Auto discharge |
Discharge time <0.5 second for C = 1 μF or less |
|
Live circuit detection |
Inhibit test if terminal voltage > 30 V prior to initialization of test |
|
Maximum capacitive load |
Operable with up to 1 μF load |
|
Output Voltage | ||
50 V (0% to +20%) |
Display range |
0.01 to 6.00 MΩ |
Resolution |
0.01 MΩ |
|
Test current |
1 mA @ 50 kΩ |
|
Resistance accuracy ±(% of Rdg + Counts) |
±(3% + 5 counts) |
|
Display range |
6.0 to 50.0 MΩ |
|
Resolution |
0.1 MΩ |
|
Test current |
1 mA @ 50 kΩ |
|
Resistance accuracy ±(% of Rdg + Counts) |
±(3% + 5 counts) |
|
100 V (0% to +20%) |
Display range |
0.01 to 6.00 MΩ |
Resolution |
0.01 MΩ |
|
Test current |
1 mA @ 100 kΩ |
|
Resistance accuracy ±(% of Rdg + Counts) |
±(3% + 5 counts) |
|
Display range |
6.0 to 60.0 MΩ |
|
Resolution |
0.1 MΩ |
|
Test current |
1 mA @ 100 kΩ |
|
Resistance accuracy ±(% of Rdg + Counts) |
±(3% + 5 counts) |
|
Display range |
60 to 100 MΩ |
|
Resolution |
1 MΩ |
|
Test current |
1 mA @ 100 kΩ |
|
Resistance accuracy ±(% of Rdg + Counts) |
±(3% + 5 counts) |
|
250 V (0% to +20%) |
Display range |
0.1 to 60.0 MΩ |
Resolution |
0.1 MΩ |
|
Test current |
1 mA @ 250 kΩ |
|
Resistance accuracy ±(% of Rdg + Counts) |
±(1.5% + 5 counts) |
|
Display range |
60 to 250 MΩ |
|
Resolution |
1 MΩ |
|
Test current |
1 mA @ 250 kΩ |
|
Resistance accuracy ±(% of Rdg + Counts) |
±(1.5% + 5 counts) |
|
500 V (0% to +20%) |
Display range |
0.1 to 60.0 MΩ |
Resolution |
0.1 MΩ |
|
Test current |
1 mA @ 500 kΩ |
|
Resistance accuracy ±(% of Rdg + Counts) |
±(1.5% + 5 counts) |
|
Display range |
60 to 500 MΩ |
|
Resolution |
1 MΩ |
|
Test current |
1 mA @ 500 kΩ |
|
Resistance accuracy ±(% of Rdg + Counts) |
±(1.5% + 5 counts) |
|
1000 V (0% to +20%) |
Display range |
0.1 to 60.0 MΩ |
Resolution |
0.1 MΩ |
|
Test current |
1 mA @ 1 MΩ |
|
Resistance accuracy ±(% of Rdg + Counts) |
±(1.5% + 5 counts) |
|
Display range |
60 to 600 MΩ |
|
Resolution |
1 MΩ |
|
Test current |
1 mA @ 1 MΩ |
|
Resistance accuracy ±(% of Rdg + Counts) |
±(1.5% + 5 counts) |
|
Display range |
0.6 to 2.0 GΩ |
|
Resolution |
100 MΩ |
|
Test current |
1 mA @ 1 MΩ |
|
Resistance accuracy ±(% of Rdg + Counts) |
±(10% + 3 counts) |
|
General Specifications | ||
Maximum voltage applied to any terminal and common |
1000 V |
|
Storage temperature |
-40 °C to 60 °C (-40 °F to 140 °F) |
|
Operating temperature |
-20 °C to 55 °C (-4 °F to 131 °F) |
|
Temperature coefficient |
0.05 x (specified accuracy) per °C for temperatures <18 °C or >28 °C (<64 °F or >82 °F) |
|
Relative humidity |
Noncondensing |
|
0% to 95% @ 10 °C to 30 °C (50 °F to 86 °F) | ||
0% to 75% @ 30 °C to 40 °C (86 °F to 104 °F) | ||
0% to 40% @ 40 °C to 55 °C (104 °F to 131 °F) | ||
Vibration |
Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument |
|
Radio frequency communication |
2.4 GHz ISM Band |
|
Radio frequency certification |
FCC: T68-FBLE, IC: 6627A-FBLE |
|
Electromagnetic Compatibility | ||
International |
IEC 61326-1:Portable Electromagnetic Environment; IEC 61326-2-2 CISPR 11: Group 1, Class A |
|
Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself. | ||
Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. | ||
Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object. The equipment may not meet the immunity requirements of this standard when test leads and/or test probes are connected. | ||
Korea (KCC) |
Class A Equipment (Industrial Broadcasting & Communication Equipment) |
|
Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes. | ||
USA (FCC) |
47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103. |
|
Enclosure protection |
IEC 60529: IP40 (non-operating) |
|
Safety | ||
IEC 61010-1 |
Pollution Degree 2 |
|
IEC 61010-2-033 |
CAT IV 600 V / CAT III 1000 V |
|
Batteries |
Four AA batteries (IEC LR6) |
|
Battery life |
Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off. |
|
Size (H x W x L) |
5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in) |
|
Weight |
550 g (1.2 lb) |
|
Altitude |
Operating |
2000 m |
Storage |
12,000 m |
|
Over-range capability |
110% of range except for capacitance which is 100% |
|
Frequency overload protection |
<107 V Hz |
|
Fuse protection for mA input |
0.44A, 1000 V, IR 10 kA |
|
